EDI-Home-Logo




English  |  Français  |  Español  |  中文  |  Deutsch

diffuser-express-title-block
 

Stainless Steel Clamps For Tube Membranes


TubeClamps

304 SS Standard with 316 SS available, Special Order

 

304 SS clamps are typically stock items. 316 SS clamps are stocked in some sizes.
Non-stocked sizes may have 4–6 week lead time.






Get an Estimate on Parts




Thru Tube Mounting Connection Kit


ThurTubeMountingKitPieces

The Thru Tube Mounting Connection Kit consists of a stainless steel nipple with air inlet holes and two special EPDM rubber gaskets.  The gaskets provide a seal and also serve as a bushing to hold the assembly in the center of the air piping.  The stainless steel nipple joins the two diffusers to complete the connection.

The kit is designed to mount T-Series diffusers to square or rectangular air piping.  Reference the diffusers in the T-Series section to select the proper diffuser for your application.  Call for part number and pricing.  Specify the air piping cross-section dimension as well as the diameter of the outlet holes.








Get an Estimate on Parts


EDI 316 SS Cast Diffuser Mount


SsCastDiffuserMount
The special 316SS diffuser mount tee is designed to mount 3/4-inch coarse bubble or fine bubble threaded tube diffusers on SS pipe.  The mount is cast for maximum strength.  A large diameter pipe contact area reduces pipe fatigue, making the diffuser mount suitable for even thin wall pipe.  A special leveling bar on the bottom of the mount is utilized during the fabrication process to ensure diffusers will be level when installed.  The 316SS material can be used with either 304SS or 316SS pipe.

Part Number

01005






Get an Estimate on Parts

Replacement Polyurethane Flapper Check Valve for Wyss™ Unit


Flapper

Part Number

00277






Get an Estimate on Parts

Sanitaire™ 9-inch (230mm) Ceramic to Membrane Conversion Kit

SanitareFlygtCeramicToMembrane

The 9-inch (230mm) Ceramic to EPDM Conversion Kit for Sanitaire™ Unit consists of two pieces: one glass-reinforced polypropylene membrane support plate and one 9-inch diameter EPDM disc membrane.

Part Number

00309






Get an Estimate on Parts

AERCOR™/Norton™ Ceramic to Membrane Conversion Kit


AercorCeramicToMembrane

Convert AERCOR™ and Norton™ holders for use with industry standard 9-inch disc membranes.  Kit consists of two pieces: one glass-reinforced polypropylene membrane support plate and one 9-inch diameter EPDM disc membrane.  

Part Number

00420






Get an Estimate on Parts

NOPON™ and Water Engineering/WABAG/Hawker-Siddley 7-inch (215mm) Porous Polyethylene/Ceramic to Membrane Conversion Kit


Napol7inMembraneConversion
The 7-inch (215mm) Conversion Kit for NOPON™ and Water Engineering /WABAG/Hawker-Siddley™ Units consists of two pieces: one glass-reinforced polypropylene membrane support plate and one 7-inch diameter EPDM disc membrane.

Part Number

02140






Get an Estimate on Parts

EIMCO™ Fine Bubble Disc to EDI™ Fine Bubble Disc Conversion


EimcoFineBubbleConversion

Convert the Eimco™ fine bubble disc diffuser to the industry standard 9-inch diameter disc membrane diffuser units.  Kits consist of the EDI FlexAir™ 9-inch diameter advanced technology disc diffuser unit with 3/4-inch NPT adapter to convert existing 1-inch connection and EPDM gasket.  Normal operating airflow is between 0.5–5.0 scfm per diffuser.  High-capacity diffusers are available to meet high-airflow applications.

Part Number

02799







Get an Estimate on Parts

AERCOR™/Norton™ 7-inch Ceramic Dome to Membrane Conversion Kit


AercorCeramicConversionKit
Flexible membrane conversion for 7-inch diameter ceramic dome units (1/2-inch center bolt design) to industry standard 9-inch diameter disc membrane diffuser units.  Conversion and upgrade provides major capacity increase, significant efficiency gains, and reduced maintenance requirements.  Kits typically consist of EDI 9-inch diameter advanced technology disc diffuser unit, with 3/4-inch NPT male threads, adapter for 1/2-inch threads, EPDM gasket, and stainless bolt for unit connection.  Normal operating airflow for the 9-inch diameter conversion unit is 0.5–5.0 scfm per unit.  High-capacity diffusers are available to meet high-airflow applications.

Part Number

00422






Get an Estimate on Parts

Universal Diffuser Mount


UniversalDiffuserMount

The Universal Diffuser Mount (UDM) for fine bubble or coarse bubble disc diffusers is designed to accept a 3/4-inch NPT diffuser connection.  The UDM is engineered for use with 2-inch through 8-inch pipe.  Pipe can be thin wall to heavy wall plastic or metal pipe.  UDM can also be glued to PVC or ABS piping if desired.  Installation includes drilling a 1¼-inch diameter hole, de-burring the hole, installing the UDM (with or without glue) and screwing the diffuser into the UDM.  The UDM is to be used for mounting diffusers on the top or bottom of the lateral and is not recommended for sidewall mount of diffuser units.  Note: Special installation instructions included for each order.  

Part Number

00308








Get an Estimate on Parts

Specialty Diffuser Parts